Edwards GXS Series User Manual

9.4.18 Default reset
Resets all of the non‑volale conguraon sengs on the pump (for example: delays,
temperature setpoints and thresholds) to their default factory‑seng values for that
pump type.
9.4.19 Display Inverter Fault History (DP Inv Fault Hist) menu
Under the Setup menu. Scroll by pressing the UP/DOWN keys. Press ENTER to open a
sub menu or CANCEL to exit back to the Setup menu.
Table 44
Fault history menu
Fault history menu
DP Inv Fault Hist (Dry Pump Inverter Fault History)
MB Inv Fault Hist (Booster Inverter Fault History)
Each inverter fault history contains up to 32 entries, each contains one alarm and one
warning, where 1 is the most recent. Scroll by pressing the UP/DOWN keys. Press
CANCEL to exit back to the Inverter fault history menu.
9.4.20 Soware version display menu
Under the Setup menu. Scroll through the soware version loaded in the processors by
pressing the UP/DOWN keys. Press CANCEL to exit back to the Setup menu.
Table 45
Soware display menu
Soware display menu
Execuve...
Support...
DP Inverter...
DP Inverter 2...
MB Inverter...
DP Inv Params...
DP Inv2 Params...
MB Inv Params...
9.4.21 Display serial number
Under the Setup menu. View the pump serial number. Press CANCEL to exit back to the
Setup menu.
9.4.22 Fit accessory menu
Under the Setup menu. Scroll by pressing the UP/DOWN keys. Press ENTER to open a
sub menu or CANCEL to exit back to the Setup menu. A security code is needed to enter
the Fit accessory menus: 538.
Page 130
M58800880_H - Pump display terminal

Edwards GXS Series Specifications

General

Brand	Edwards
Model	GXS Series
Category	Water Pump
Language	English