Edwards GXS Series User Manual

involved in the service of your equipment. The hazard informaon also lets us select the
correct procedures to service your equipment.
We provide instrucons for compleng the form in the Declaraon of Contaminaon of
Vacuum equipment and Components – Procedure HS1.
If you are returning a vacuum pump, note the following:
▪ If a pump is congured to suit the applicaon, make a record of the conguraon
before returning the pump. All replacement pumps will be supplied with default
factory sengs.
▪
Do not return a pump with accessories ed. Remove all accessories and retain
them for future use.
▪
The instrucon in the returns procedure to drain all uids does not apply to the
lubricant in pump oil reservoirs.
Download the latest documents from www.edwardsvacuum.com/HSForms/, follow the
procedure in HS1, ll in the electronic HS2 form, print it, sign it, and return the signed
copy to us.
NOTICE:
If we do not receive a completed HS2 form, your equipment cannot be serviced.
7.3 Accessories
Table 26 Accessories
Descripon
Item Number
Exhaust check valve kit NW40 for GXS160 and 250 systems
Exhaust check valve kit NW50 for GXS450 and 750 systems
A50782000
A50790000
Water ow monitoring kit*
Flow monitor 0 ‑ 60 slm
Flow monitor 0 ‑ 200 slm
A50783000
A60027043
A60027044
Nitrogen ow switches:
Suitable for 0 ‑ 60 slm
Suitable for 0 ‑ 204 slm
A50633000
A50634000
External Evacuaon System (EES) kits:
Suitable for GXS 160/1750**
Suitable for GXS with 2600 booster**
Suitable for GXS with 4200 booster**
M58825019
M58935019
M59845019
Booster purge kits:
Suitable for GXS with 1750 or 2600 booster
Suitable for GXS with 4200 booster
M56425030
M59845023
PDT D37280700
MCM MicroTIM
Connector kit for the MCM MicroTIM
Virtual Display Terminal (VPDT)
D37360320
D37422802
D37488500
Accessory modules:
Page 77
M58800880_H - Service, spares and accessories

Edwards GXS Series Specifications

General

Brand	Edwards
Model	GXS Series
Category	Water Pump
Language	English