Section 7 — Voice Parameters EPS-16 PLUS Musician's Manual
EDIT/Amp Page
The parameters on this page control the amplitude (or volume) of the
Wavesample.
Wavesample Volume
Use this parameter to set the volume of an individual Wavesample.
Range: 0 to 99
Wavesample Pan
Use this parameter to assign a Wavesample to a location in a stereo field; either
within the main outputs, or any of the pairs of auxiliary outputs.
Range: -99 (full Left) to +99 (full Right)
This page allows you to assign a modulator to control the volume of an
instrument, layer, and/or Wavesample and determine how much the selected mod
will affect it Any of the fifteen available modulators can be applied to modulate
the volume of the Wavesample.
This page allows you to assign a modulator to control the panning of an
instrument, layer, and/or Wavesample. Any of the fifteen available modulators
can be applied to modulate the pan position of the Wavesample.
Volume Modulator Crossfade Breakpoints
The Crossfade breakpoints (A and B, C and D) allow you to scale the effect of the
volume modulator, to create keyboard, velocity, or other types of crossfades.
Using the Crossfade breakpoints, you can customize how the volume modulator
(also selected on the EDIT/Amp page) will affect the volume of the Wavesample.
7 - 24
EDIT/Amp Page
To Next Page
Loading...
