186 UMFLUXUS_G6V4-2EN, 2011-03-29
FLUXUS G60x A Menu Structure
Install Material with Special Funct.\SYSTEM settings\
Libraries\Extended Library = on
selection of the function for the temperature and
pressure dependency of the material properties
selection of a user defined material
selection whether the user defined material is to
be edited or deleted
This display will only be indicated if the selected
material already exists.
input of a designation for the selected material
input of the constants for the transversal sound
speed of the material
The number of constants depends on the func-
tion selected above.
input of the constants for the longitudinal sound
speed of the material
The number of constants depends on the func-
tion selected above.
selection of the sound wave type for the flow
measurement
input of the roughness of the material
confirmation that the changes are to be stored
This display will only be indicated if a new mate-
rial has been entered or the properties of an ex-
isting material have been changed.
cold start
resistant
Edit Material ↕
Basics:Y=m*X +n
USER Material ↕
#01:--not used--
USER Material 2
>EDIT< delete
#2: Input Name:
USER MATERIAL 2
Default soundsp.
long. >TRANS.<
To Next Page
Loading...
