188 UMFLUXUS_G6V4-2EN, 2011-03-29
FLUXUS G60x A Menu Structure
selection of a user defined medium
selection whether the user defined medium is to
be edited or deleted
This display will only be indicated if the selected
medium already exists.
input of a designation for the selected medium
input of the constants for the longitudinal sound
speed of the medium
The number of constants depends on the func-
tion selected above.
input of the kinematic viscosity of the medium
input of the operating density of the medium
input of the gas compressibility factor
confirmation that the changes are to be stored
This display will only be indicated if a new medi-
um has been entered or the properties of an ex-
isting medium have been changed.
After the input of HotCode 071001
input of the lower limit of the inner pipe diameter
for the displayed transducer type
range: 3...63 mm
x
cold start
resistant
USER Medium ↕
#01:--not used--
USER MEDIUM 2
>EDIT< delete
#2: Input Name:
USER MEDIUM 2
To Next Page
Loading...
Need help?
General
