Versiv Series Cabling Certification Product Family
Technical Reference Handbook
90
How to Do an Autotest
When you tap TEST on the main tester or press on the main
or remote tester, the testers do an Autotest. The Autotest
includes all the tests necessary to certify that the cabling meets or
exceeds the performance requirements specified in the selected
test limit.
Figure 30 shows the equipment for Autotests on twisted pair
cable.
Figure 30. Equipment for Autotests on Twisted Pair Cable
Note
If you have two main testers, you can use one as a
remote. To select the remote function, tap TOOLS >
Main as Remote.
GPU111.EPS
Main and remote testers with
DSX CableAnalyzer modules
installed
For tests on permanent links:
two permanent link adapters
(PRO model or optional)
For tests on channels: two
channel adapters
AC adapters with line cords
(optional)
To Next Page
Loading...
