Fluke DSX-8000 - Delete a Project; Manage Projects on a Flash Drive

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
554
1 On the home screen, tap the PROJECT panel, tap MANAGE,
then tap Copy.
2 Use the keyboard to enter a name for the project, then tap
DONE.
Delete a Project
1 On the home screen, tap the PROJECT panel.
2 Make sure the project you want to delete is the active project.
If it is not, tap CHANGE PROJECT, then select the project you
want to delete.
3 On the PROJECT screen, tap MANAGE, then tap Delete. The
tester shows a warning if you have not uploaded all of the
results to a PC. Tap DELETE to delete the project.
Note
You cannot delete the DEFAULT project.
Manage Projects on a Flash Drive
You can export or import projects to or from a flash drive, and
delete projects on the flash drive. The project data includes all
project settings, test results, and ID sets.
WCaution
 Do not remove the USB flash drive while the LED on
the drive flashes. Doing so can corrupt the data on
the drive.
 You can lose a USB flash drive, cause damage to it,
or accidentally erase the contents of the drive. Thus,
Fluke Networks recommends that you save no more
than one day of test results on a flash drive.
To copy a project