Fluke DSX-8000 - Tutorial: Certify Fiber Optic Cabling; Step 1: See How Much Memory Is Available

Chapter 2: Get Started
Tutorial: Certify Fiber Optic Cabling
43
Tutorial: Certify Fiber Optic Cabling
The tutorial in this section gives instructions on how to set up a
loss/length test in Smart Remote mode to certify fiber optic
cabling, and save the results.
Figure 12 shows the minimum equipment necessary for this
tutorial.
Step 1: See How Much Memory is Available
On the home screen, tap the TOOLS icon, then tap Memory
Status.
The MEMORY STATUS screen shows these values:
 The percentage of memory available
 The number of test records that are saved
 The number of ID sets that have been downloaded to the
tester from LinkWare PC or LinkWare Live.
 The memory space taken by other files, such as the databases
for projects and limits.