Fluke DSX-8000 - Step 1: See How Much Memory Is Available; Step 2: Set up a Twisted Pair Test

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
38
Step 1: See How Much Memory is Available
On the home screen, tap the TOOLS icon, then tap Memory
Status.
The MEMORY STATUS screen shows these values:
 The percentage of memory available
 The number of test records that are saved
 The number of ID sets that have been downloaded to the
tester from LinkWare PC or LinkWare Live.
 The memory space taken by other files, such as the databases
for projects and limits.
Step 2: Set Up a Twisted Pair Test
2-1 Attach DSX CableAnalyzer modules to the main tester and
the remote.
2-2 On the home screen, tap the test setup panel.
2-3 On the CHANGE TEST screen, tap NEW TEST.
2-4 On the TEST SETUP screen, tap each setting to make these
selections:
 Module: This is the module you will use for the test. For a
test on twisted pair cable, tap DSX-8000 CableAnalyzer or
DSX-5000 CableAnalyzer.
Note
You can select settings for any module that the
tester can use. It is not necessary to install a
module before you set up a test for that module.
 Cable Type: This is the type of cable you will test. The
CABLE TYPE screen shows the last 10 types of cable that
were selected. Tap the correct cable type.