Fluke DSX-8000 - Select a Custom Fiber Type or a Custom Limit

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
582
GPU177.EPS
Figure 207. Zones on a Fiber Endface
Select a Custom Fiber Type or a Custom Limit
1 On the home screen, tap the test setup panel.
2 On the CHANGE TEST screen, tap the test, then tap EDIT.
3 Select a custom fiber type or limit:
 On the TEST SETUP screen, tap Fiber Type, tap MORE, tap
Custom, then tap a custom fiber type.
 On the TEST SETUP screen, tap Test Limit, tap MORE, tap
Custom, then tap a custom limit.
4 On the TEST SETUP screen, tap SAVE.
Contact zone
Adhesive zone
Cladding zone
Core zone