Fluke DSX-8000 - Tutorial: How to Use a Project for Tests with a Cableanalyzer Module; Step 1: Select a Project

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
532
Tutorial: How to Use a Project for Tests with a
CableAnalyzer Module
This tutorial assumes that you completed the tutorial “Make a
New Project” on page 516.
Figure 202 shows the minimum equipment necessary for this
tutorial.
Figure 200. Equipment for the Twisted Pair Project Tutorial
Step 1: Select a Project
If the correct project name does not show on the home screen,
tap the PROJECT panel, tap CHANGE PROJECT, tap the name of a
project, then tap DONE.
GPU101.EPS
 Main and remote testers with
DSX CableAnalyzer modules
installed
 Two channel adapters
 Twisted pair cable
 AC adapters with line cords
(optional)
A
C
D
B