Fluke DSX-8000 - How to Replace a Saved Result that Failed

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
472
SmartLoop Results
The tester shows the SmartLoop results on two sets of EventMap,
TABLE, and TRACE screens, one for each fiber in the link. See
Figure 185.
GPU172.EPS
Figure 185. EventMap from a SmartLoop Test
 The purple fiber is the loopback cord.
Note
In saved SmartLoop results, the loopback cord is
gray.
 The fiber between the launch cord and the loopback cord is
the fiber on one side of the link.
D
B
C
A