Fluke DSX-8000 - How to Add a Result to a Saved Result

Chapter 12: The OptiFiber Pro HDR OTDR Module
The SmartLoop Test
471
GPU217.EPS
Figure 184. SmartLoop Test Connections
APC
Launch cord
Loopback cord
(Tail Cord for Fiber
A and Launch Cord
for Fiber B)
Tail cord
Fiber link
Fiber
A
Fiber
B
OTDR Port event for
Fiber B
End event for
Fiber A
Optional OTDR
port protector
patch cord*
(30 cm, 12 in)
*Optional for tests in one direction. Recommended for bi-directional tests
to protect the OTDR port from wear. These cords are available from
Fluke Networks.