185
Chapter 6: Diagnose Copper Test
Failures
Fault Information
If an Autotest on twisted pair cabling fails, the DSX CableAnalyzer
automatically gives you information about faults. The
information includes wire maps, HDTDR and HDTDX analyzer
plots, and fault information. To see the information, tap the
FAULT INFO tab after an Autotest. Figure 84 shows examples of
fault information.
To get only HDTDR and HDTDX results, select Diagnostics from
the TOOLS menu. These results do not include a PASS/FAIL status.
GPU192.EPS
Figure 84. Examples of FAULT INFO Screens for Faults on Twisted Pair
To Next Page
Loading...
