Fluke DSX-8000 - Twisted Pair Autotest Results

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
96
Twisted Pair Autotest Results
The tests listed below apply to twisted pair cabling.
Note
Some tests are not included in some test limits.
 Wire map
 Resistance
 Resistance unbalance in a pair (in limits with (+PoE) and
others)
 Resistance unbalance between pairs (in limits with (+PoE) and
others)
 Length
 Propagation delay
 Delay skew
 Insertion loss (attenuation)
 Impedance
 NEXT (near-end crosstalk)
 PS NEXT (power-sum near-end crosstalk)
 ACR-N (attenuation to crosstalk ratio at the near end)
 PS ACR-N (power-sum attenuation to crosstalk ratio, near
end)
 ACR-F (attenuation to crosstalk ratio at the far end)
 PS ACR-F (power-sum attenuation to crosstalk ratio, far end)
 Return loss
 TCL (transverse conversion loss, in limits with (+All))
 CDNEXT (common-mode to differential-mode near-end
crosstalk, in limits with (+All))
 CMRL (common-mode return loss, in limits with (+All))
 ELTCTL (equal level transverse conversion transfer loss, in
limits with (+All))
 HDTDR and HDTDX analyzers (optional tests, not required by
any test limit. See Chapter 6.)