Versiv Series Cabling Certification Product Family
Technical Reference Handbook
374
How to Quickly Try Different OTDR Settings in Real Time
Trace Mode
During a Real Time Trace test, you can quickly change some OTDR
settings when you want to try different settings on the same
fiber. During the test, tap SETUP on the REAL TIME TRACE screen,
then select settings on the MANUAL OTDR screen (Figure 152).
You can save your settings to the Active test setup or to a New
test setup, or you can tap TEST to do a test without saving the
settings.
GPU229.EPS
Figure 152. Manual OTDR Screen for Quick Changes to Settings in
Real Time Trace Mode
A
C
D
B
To Next Page
Loading...
