Fluke DSX-8000 - How to Remove and Install the Connector Adapters

Chapter 12: The OptiFiber Pro HDR OTDR Module
How to Remove and Install the Connector Adapters
401
How to Remove and Install the Connector
Adapters
You can change the connector adapter on the OTDR port of the
modules to connect to SC, ST, LC, and FC fiber connectors. You
can remove the adapter also to clean the fiber endface in the
port. See Figure 163.
GPU205.EPS
Figure 163. How to Remove and Install the Connector Adapters
LC
SC
Keep extra adapters in
the containers provided.
WCaution
Turn only the collar on
the adapter. Do not use
tools to remove or install
the adapters.
Key
Slot
Put the key into the slot
before you turn the collar
on the adapter.