Versiv Series Cabling Certification Product Family
Technical Reference Handbook
20
On a remote
The LEDs show the battery status at the end of the power-up
sequence, as shown in Figure 3.
GPU102.EPS
Figure 3. LEDs Show the Remote’s Battery Status
To see more information about a remote’s battery status
1 Make the connections shown in Figure 4 and turn on both
testers.
2 For CertiFiber Pro testers, select Smart Remote or Loopback
mode.
3 Make sure the connection icon shows at the top of the screen
().
4 Tap TOOLS, then tap Battery Status.
84 % - 100 %
67 % - 83 %
51 % - 66 %
34 % - 50 %
18 % - 33 %
0 % - 17 %
To Next Page
Loading...
