Versiv Series Cabling Certification Product Family
Technical Reference Handbook
458
How to Quickly Try Different HDR OTDR Settings in Real
Time Trace Mode
After a HDR OTDR test, you can quickly change some OTDR
settings when you want to try different settings on the same
fiber. After you do a test, tap SETUP on the TRACE screen, then
select settings on the MANUAL PON OTDR screen (Figure 178).
You can save your settings to the Active test setup or to a New
test setup, or you can tap TEST to do a test without saving the
settings.
GPU232.EPS
Figure 178. Manual PON OTDR Screen for Quick Changes to Real Time
Trace Settings
A
C
D
B
To Next Page
Loading...
