Fluke DSX-8000 - Chapter 9 Certify Fiber Cabling; Overview of the Certifiber Pro Optical Loss Test Set Modules

233
Chapter 9: Certify Fiber Cabling
WWarningX*
Before you use the tester, read the safety
information that starts on page 6.
Overview of the CertiFiber Pro Optical Loss
Test Set Modules
The Fluke Networks CertiFiber
®
Pro Optical Loss Test Set (OLTS)
modules attach to Versiv
™
and Versiv 2 main and remote testers
to make rugged, hand-held testers that let you certify,
troubleshoot, and document optical fiber cabling installations.
The testers include these features:
 Measures optical power loss and length on dual-fiber,
multimode cabling at 850 nm and 1300 nm (CFP-MM) or on
dual-fiber singlemode cabling at 1310 nm and 1550 nm
(CFP-SM). The four-wavelength module (CFP-QUAD) measures
at 850 nm, 1300 nm, 1310 nm, and 1550 nm.
 Interchangeable connector adapters on input and output
ports let you make reference and test connections that agree
with ISO standards for most SFF (small form factor)
connectors.
 Visual fault locator helps you find breaks, bad splices, and
bends and verify fiber continuity and polarity.