Chapter 1: Get Acquainted
How to Install a Strap
33
Display Brightness
1 On the home screen, tap the TOOLS icon, then tap Display.
2 On the brightness scale, tap or slide the yellow bar to adjust
the brightness, then tap DONE.
Note
When you increase the display brightness, the
battery life decreases.
3 To go back to the home screen, tap or press .
Import User Preferences from a File
You can use LinkWare PC software to make a file that contains
settings for user preferences, then you can import the file into the
tester. You can also export settings from a tester to the PC. See
the online help in LinkWare PC for instructions.
How to Install a Strap
Two types of straps are available for the tester: a hand strap that
helps you hold the tester, and a carrying strap that lets you carry
and hang the tester. If one of the types is not included with your
tester, you can purchase it from an authorized Fluke Networks
distributor. Figure 8 shows how to install a strap and how to use
the hand strap.
To Next Page
Loading...
