Fluke DSX-8000 - Memory Capacity

Chapter 16: Manage Test Results
Memory Capacity
513
Memory Capacity
These are the approximate numbers of tests you can save in a
main tester:
DSX CableAnalyzer, Cat 6A Autotest results, with plot data
included
 Versiv: 12,000
 Versiv 2: 25,000
CertiFiber Pro Autotest results
 Versiv: 30,000
 Versiv 2: 30,000
OptiFiber Pro OTDR Autotest results, 10 km multimode fiber
 Versiv: 4,500
 Versiv 2: 9,800
The capacity available for test results depends on the space used
by the software and custom test limits in the tester.
The number of test results you can save decreases if you save
more tests in each record, or if you save tests that use more
memory. For example, records that include OTDR tests and
images from the video probe use more memory than records that
include OTDR tests and FaultMap tests.
To make more memory available, you can export results to a USB
flash drive, then delete the results in the tester. See “Manage
Results on a Flash Drive”on page 510.