Fluke DSX-8000 - Appendix B Reference Method Names

641
Appendix B: Reference Method Names
Industry standards use different names for the three reference
methods. Tables 28 and 29 show the names used in this manual
and by four common standards.
Table 28. Reference Method Names for TIA/EIA Standards
Link End
Connections
Included in Loss
Results
Method
Name in This
Manual
TIA-526-14B
(multimode)
TIA/EIA-526-7
(singlemode)
2 connections 1 Jumper One-Cord
Reference Method
(was Method B)
Method A.1
1 connection 2 Jumper Two-Cord
Reference Method
(was Method A)
Method A.2
None 3 Jumper Three-Cord
Reference Method
(was Method C)
Method A.3