Fluke DSX-8000 - Optifiber Pro HDR Connectors, Keys, and Leds

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
398
 Span function lets you limit OTDR results to a section of fiber
that you define. See Chapter 13.
 SmartLoop
™
test: One test gives you OTDR results for both
fibers in a link.
 DataCenter OTDR
™
test gives optimal performance when you
do tests on fiber installations that have short links, many
connections, and possibly large reflections.
 FaultMap
™
test lets you make maps of your cable plant, see
patch cords as short as 0.5 m, and see events that have poor
reflectance.
 Visual fault locator helps you verify the continuity of fibers
and locate faults in fibers and connectors.
 Optional video probe lets you inspect fiber endfaces and save
the images in test reports.
OptiFiber Pro HDR Connectors, Keys, and LEDs
Refer to Figure 162.
 LCD display with touchscreen.
 Singlemode OTDR port with an APC (angled physical contact)
endface, interchangeable SC adapter, and protective cap. The
LED in front of the port turns on when the port emits an
optical signal.
WCaution
Do not connect PC or UPC connectors to the HDR
OTDR port. Doing so can damage the port’s APC
endface, and the large reflection at the OTDR port
can cause unreliable test results.
 Visual fault locator port and protective cap. The LED in front
of the port turns on when the port emits an optical signal.