Fluke DSX-8000 - How to Remove and Install the Connector Adapters

Chapter 11: The OptiFiber Pro OTDR Module
How to Remove and Install the Connector Adapters
307
How to Remove and Install the Connector
Adapters
You can change the connector adapters on the OTDR ports of the
modules to connect to SC, ST, LC, and FC fiber connectors. You
can remove the adapter also to clean the fiber endface in the
port. See Figure 129.
GPU165.EPS
Figure 129. How to Remove and Install the Connector Adapters
LC
SC
Keep extra adapters in
the containers provided.
WCaution
Turn only the collar on the adapter.
Do not use tools to remove or install
the adapters.
Key
Slot
Put the key into the slot
before you turn the collar
on the adapter.