Fluke DSX-8000 - Use an Updated Main Tester to Update Other Testers

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
592
Use an Updated Main Tester to Update Other Testers
1 Turn on both testers and connect the AC adapters to both
testers.
2 Use the USB cable provided to connect the updated main
tester to the remote or to another main. See Figure 210.
3 Follow the instructions shown on the display of the updated
main tester.
Note for Versiv remotes
If a remote has newer software than the main
tester, the main tester can install the older
software in the remote so that you can use the
two testers together. The remote cannot install
the newer software in the main tester.