Fluke DSX-8000 - Audible Tone; Power Line Frequency

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
32
2 Tap Timeout Period, then tap Backlight or Power Down.
3 Tap a time. To always keep the backlight or tester on, tap
Disabled.
4 To go back to the home screen, tap two times or press
.
The remote tester turns off after 60 minutes of inactivity. You
cannot change this setting.
Audible Tone
You can enable or disable the tones the tester makes during tests
and when you press keys. If you connect a remote tester to the
main tester through DSX or CertiFiber Pro modules, the remote
uses the main tester’s setting.
1 On the home screen, tap the TOOLS icon.
2 In the Audible Tone panel, tap the control to show On or Off.
3 To go back to the home screen, tap or press .
Power Line Frequency
Set the power line frequency to the power frequency in the area
where you will use the tester. This setting decreases the effects of
ac noise on the circuits in the tester.
1 On the home screen, tap the TOOLS icon.
2 In the Power Line Frequency panel, tap the control to show
50 Hz or 60 Hz.
3 To go back to the home screen, tap or press .