Fluke DSX-8000 - Page 409

Chapter 11: The OptiFiber Pro OTDR Module
Real Time Trace
373
 To exit the test, tap STOP () then tap EXIT.
 To save the current results, tap STOP () then tap SAVE.
Notes
The results for the real time trace show only the
OTDR trace at one wavelength.
The real time trace result does not include a PASS/
FAIL status.
The real time trace does not show the markers for
the launch and tail cords.
GPU231.EPS
Figure 151. Real Time Trace Screen (OptiFiber Pro module)
C
A
B