Chapter 3: Certify Twisted Pair Cabling
Twisted Pair Autotest Results
105
GPU86T.EPS
Figure 41. PERFORMANCE Tab
The selected test limit does not have a limit for the test, or a
dB rule applies. See “About dB Rules” on page 150.
The results are within the range of accuracy uncertainty
for the tester. See “PASS*/FAIL* Results” on page 98.
The measurement shown for frequency-domain results is the
worst margin. (The insertion loss plot is different. See “Insertion
Loss” on page 116.)
When more than one button shows at the bottom of the screen,
the tester highlights one in yellow to recommend which one to
tap. See “Buttons to Do Tests and Save Results” on page 61.
B
C
D
E
A
To Next Page
Loading...
