Chapter 4: Test Twisted Pair Through a PoE Device (DSX-5000)
How to Do an Autotest Through a PoE Device
161
Notes
When you turn on the AC wire map test:
The Autotest takes more time.
The tester does not do some tests, such the
resistance test and the shield test.
The Autotest does not stop if there is a wire
map fault.
The tester does not do a continuity test on
the shield.
GPU94.EPS
Figure 71. Permanent Link Connections Through a PoE Device
End
permanent
link
Remote with
permanent link
adapter
Optional
consolidation
point
Wall
outlet
Tester with
permanent link
adapter
Start
permanent
link
Patch panel
Unpowered midspan
PoE device
Horizontal cabling
To Next Page
Loading...
