Chapter 11: The OptiFiber Pro OTDR Module
OTDR Results
345
GPU12.EPS
Figure 144. Event Table
If the tester made measurements at two wavelengths, tap the
arrow buttons to see results for the other wavelength.
Possibly, some events show only at one wavelength.
The icons show the overall status of the event at all
wavelengths. This can be different from the event status
shown on the OTDR plot, which is the status for each
wavelength.
: The measurement is within the limit.
: The measurement exceeds the limit.
A
B
C
To Next Page
Loading...
