Versiv Series Cabling Certification Product Family
Technical Reference Handbook
358
Reflectances from hidden events can possibly show “<" because
the tester cannot measure the backscatter before the event.
Note
Reflectance measurements are affected by the
backscatter value you enter on the TEST SETUP
screen.
GPU226.EPS
Figure 147. EVENT DETAILS Screen for a Bend
The difference between the loss measurements for the longer
and shorter wavelengths. The value for the longer wavelength is
red if it exceeds the threshold for the difference in loss between
the two measurements. The shorter wavelength shows 0 dB and
an result on the BEND and LOSS tabs because it is the
To Next Page
Loading...
