Fluke DSX-8000 - Page 417

Chapter 11: The OptiFiber Pro OTDR Module
The SmartLoop Test
381
GPU171.EPS
Figure 155. SmartLoop Test Connections
UPC
Launch cord
Loopback cord
(Tail Cord for Fiber
A and Launch Cord
for Fiber B)
Tail cord
Fiber link
Fiber
A
Fiber
B
OTDR Port event for
Fiber B
End event for
Fiber A
Optional OTDR
port protector
patch cord*
(30 cm, 12 in)
*Optional for tests in one direction. Recommended for bi-directional tests
to protect the OTDR port from wear. These cords are available from
Fluke Networks.