Fluke DSX-8000 - Chapter 13: OTDR Span and Event Editing Functions; How to Edit a Loss Event

Chapter 12: The OptiFiber Pro HDR OTDR Module
HDR OTDR Results
445
GPU223.EPS
Figure 174. HDR OTDR Trace
 Tap SETUP to change the RANGE, PULSE WIDTH, AVERAGING
TIME, and wavelengths for the test. See “How to Quickly
Change OTDR Settings After a Test” on page 446. You can also
tap CURRENT to see the settings used on the test.
 Tap or to move the cursor to another event.
 The wavelength the tester used for the test. If the tester used
more than one wavelength, tap or to see the other
wavelength. Possibly, some events show only at one
wavelength.
B
C
D
A
G
I
J
FE
H