Fluke DSX-8000 - Page 505

Chapter 12: The OptiFiber Pro HDR OTDR Module
The SmartLoop Test
469
GPU216.EPS
Figure 183. SmartLoop Launch Compensation Connections
APC
Launch cord
Tail cord
Loopback cord
Main tester with
HDR OTDR module
Adapters
Optional OTDR
port protector
patch cord*
(30 cm, 12 in)
*Optional for tests in one direction. Recommended for bi-directional tests
to protect the OTDR port from wear. These cords are available from
Fluke Networks.