Chapter 1: Get Acquainted
Main Tester as a Remote
15
Type A USB port: This USB host port lets you save test results on a
USB flash drive and connect the FI-1000 video probe to the tester.
On a Versiv main tester, this port lets you connect a Wi-Fi adapter
for access to the Fluke Networks cloud service LinkWare Live.
(Versiv 2 testers have an internal Wi-Fi radio.)
Headset jack. See “How to Use the Talk Function” for the
DSX-CableAnalyzer on page 157 or for the CertiFiber Pro OLTS
on page 293.
: Starts a test. To start a test, you can also tap TEST on the
display.
: Power button. Versiv 2: The LED in the button shows the
status of the battery charging process. See Table 2 on
page 18.
: Press to go to the home screen.
Connector for the AC adapter. Versiv: The LED is red when the
battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See “Charge the
Battery” on page 18.
RJ45 connector: Lets you connect to a network for access to the
Fluke Networks cloud service LinkWare Live.
To Next Page
Loading...
