Chapter 12: The OptiFiber Pro HDR OTDR Module
Bi-Directional SmartLoop Tests
479
The tester does not calculate averaged results in some
situations, for example if a launch, tail, or loopback cord was
not detected or if the distance to the end was not the same in
both directions.
GPU197.EPS
Figure 187. EventMap for Averaged, Bi-Directional SmartLoop Results
The purple fiber is the loopback cord.
The longest segment length of the two directions.
Tap this button to see the results for the other fiber (A or B).
Touch for 3 seconds to see a summary of the results from
ends 1 and 2 on fibers A and B. To see the EventMap for a result
in the list, tap the result.
A
B
I
G
C
D
F
H
E
To Next Page
Loading...
