Chapter 13: OTDR Span and Event Editing Functions
How to Use the Span Function
487
GPU233.EPS
Figure 189. EventMap for a Span
The black section is the span defined by the Span Start and
Span Stop locations. The span area shown is not to scale.
The distances show the lengths of segments between events, as
on an EventMap with no span defined.
The fiber outside of the span is gray. Measurements outside
of the span do not have PASS/FAIL results.
The length and overall loss of the span.
PASS: All measurements in the span were within the limits.
FAIL: One or more measurements in the span exceeded its limit.
A
B
D
B
To Next Page
Loading...
