EasyManua.ls Logo

Fluke DSX-8000 - Use a Launch Cord of the Correct Type; Use a Launch Cord of the Correct Length; Use a Launch Cord that Has the Correct Connectors

Fluke DSX-8000
700 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Versiv Series Cabling Certification Product Family
Technical Reference Handbook
602
Safety
CSA 22.2 No. 61010, IEC 61010-1 3rd Edition
EMC Versiv and Versiv 2 main and remote units:
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or
uses conductively-coupled radio frequency energy that is
necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments
other than domestic and those directly connected to a
low-voltage power supply network that supplies buildings
used for domestic purposes. There may be potential
difficulties in ensuring electromagnetic compatibility in
other environments due to conducted and radiated
disturbances.
Caution: This equipment is not intended for use in
residential environments and may not provide adequate
protection to radio reception in such environments.
Emissions that exceed the levels required by CISPR 11 can
occur when the equipment is connected to a test object.
Korea (KCC): Class A Equipment (Industrial Broadcasting &
Communication Equipment)
Class A: Equipment meets requirements for industrial
electromagnetic wave equipment and the seller or user
should take notice of it. This equipment is intended for
use in business environments and not to be used in homes.
USA (FCC): 47 CFR 15 subpart B. This product is considered
an exempt device per clause 15.103.
Versiv main and remote units and Versiv 2 remote units:
International: IEC 61326-1: Basic Electromagnetic
Environment
Altitude Operating: 13,123 ft (4,000 m); 10,500 ft (3,200 m) with ac adapter
Storage: 39,370 ft (12,000 m)
Pollution
degree
2

Table of Contents

Related product manuals