3 Copy
100
Copy
3
Print On…
Displays the [Stamp - Print On] screen.
You can select the page(s) to print the stamp from [First Page Only] and [All Pages].
Position
Displays the [Stamp - Position] screen.
For more information, refer to "[Stamp - Position] screen" (P.100).
Size
Displays the [Stamp - Size] screen.
You can select from 32, 48, 64 point for the stamp.
[Stamp - Position] screen
You can set a position to print a stamp.
Side 1
You can select from nine positions for the stamp.
Side 2
z
Same as Side 1
Add the stamp to the same location as the Side 1.
z
Opposite to Side 1
Add the stamp to the opposite location as the Side 1.
[Date] Screen
You can make copies with a date added. The printed date is the date and time that the
copy was made.
For information about the date display format, refer to "Date Format" (P.316).
1 Select [Date].
2 Select [On].
To Next Page
Loading...
