Billing Meter/Print Report
431
Machine Status
12
When the Auditron Feature is set to [On]
The following screen is displayed when the auditron feature is set to [On]. Auditron
reports can be printed for features which are set to [On] for the auditron feature by
users and by features.
For information about settings for the auditron feature, refer to "Auditron Mode" (P.397).
1 Select [Auditron Administration].
2 Select the statistics report feature
to be printed.
3 Select the range of user numbers
to be printed.
Note • If you select [Select All], this
selects all users.
4 Press the <Start> button.
îš„Auditron Report (Print Jobs)
You can check how many pages have been printed on the machine, and the total
number of sheets of paper used, for each client (job owner).
The number of print pages is counted. [Auditron Report (Print Jobs)] counts from the
time at which the data is initialized.
Note • [No.] displayed on the report is the No. (User Administration Number) registered by users in
Authentication/Auditron Administration.
îš„Auditron Report (Copy Jobs)
You can check the total number of pages copied on the machine. If there are
restrictions in place on the number of pages, these settings will appear. [Auditron
Report (Copy Jobs)] counts from the time at which the data is initialized.
Note • [No.] displayed on the report is the No. (User Administration Number) registered by users in
Authentication/Auditron Administration.
îš„Auditron Report (Scan Jobs)
You can check the total number of pages scanned on the machine. If there are
restrictions in place on the number of pages, or restrictions on color, these settings will
appear. [Auditron Report (Scan Jobs)] counts from the time at which the data is
initialized.
Note • [No.] displayed on the report is the No. (User Administration Number) registered by users in
Authentication/Auditron Administration.
To Next Page
Loading...
Need help?
General
