Fujitsu Eternus web GUI - Delete RAID Group

Chapter 6 RAID Group Management
6.2 Functions in the Action Area for RAID Group
ETERNUS Web GUI User’s Guide
122
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
4 Click the [OK] button.
→ RAID group creation starts.
5 Click the [Done] button to return to the [RAID Group] screen.
End of procedure
6.2.2 Delete RAID Group
This function deletes the registered RAID groups in the ETERNUS DX Disk storage system.
When a RAID group is deleted, the status of the drives that configured the RAID group change to
data drives that are not used by any RAID group.
The procedure to delete a RAID group is as follows:
Procedure
1 Select the RAID group that is to be deleted (multiple selections can be made)
and click [Delete] in [Action].
→ A confirmation screen appears.
2 Click the [OK] button.
→ RAID group deletion starts.
• RAID groups that have volumes registered cannot be deleted. When
deleting a RAID group, delete the volumes beforehand.
• The RAID group that is registered in the TPP cannot be deleted.
• RAID groups that are registered as REC Disk Buffer cannot be deleted.
• Up to 128 RAID groups can be deleted at once.