Fujitsu Eternus web GUI - Advanced Copy (Extent Information)

Chapter 8 Advanced Copy Management
8.1 Advanced Copy Status
ETERNUS Web GUI User’s Guide
194
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
• Remain Time
The expected time to complete transition to "Suspend" when a Concurrent Suspend request
is received.
When the "Status" is "Reserve", a "-" (hyphen) is displayed.
8.1.6 Advanced Copy (Extent information)
Detailed information (Extent information) about the Advanced Copy is displayed.
The following items are displayed in the Main area:
• Offset
The array number of extent information is displayed.
• Source LBA
The copy source start Logical Block Address (LBA) of copy with range specification is
displayed.
• Destination LBA
The copy destination start LBA of copy with range specification is displayed.
• Copy Extent Size
The data amount for copy with range specification is displayed.
Refer to "8.1.3 Remote Copy" (page 179) for the display items that are not
described in this section.