Fujitsu Eternus web GUI - Release Reservation

Chapter 5 Volume Management
5.2 Functions in the Action Area for Volume
ETERNUS Web GUI User’s Guide
104
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
4 Save the downloaded performance information file.
The default file name is "Performance_yyyymmdd.txt" (yyyymmdd: date when the file is
downloaded (year/month/day) ).
→ Downloading the performance information file starts.
5 Click the [Done] button to return to the [Performance] screen.
End of procedure
5.2.19 Release Reservation
This function releases the reservation status of volumes that are specified by the host.
Reservation and release reservation of a volume is normally performed from the host. This func-
tion must be used only when a reservation of a volume cannot be released due to errors in the
host.
This function provides the following features:
• Releasing the volume reservation status
• Releasing the volume persistent reservation status
• Deleting all the reservation keys that are registered in the ETERNUS DX Disk storage system
The procedure to release the reservation status is as follows:
Procedure
1 Select the volumes to release the reservation (multiple selections can be made),
and click [Release Reservation] in [Action].
→ A confirmation screen appears.
If the [Cancel] button in the [File Download] dialog box is clicked to
cancel the operation, an error may occur in the web browser.
To cancel the operation after the [File Download] dialog box is
displayed, wait at least 10 minutes before clicking the [Cancel] button
or click the [Save] button to complete the operation and delete the
unnecessary file.
After the download is finished, the [Done] button is available.
Be sure to pay attention when releasing reserve status as it may cause
data corruption. Check the status of the target volume before using this
function.