Fujitsu Eternus web GUI - Host Group

Chapter 9 Connectivity Management
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
265
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
9.1.2 Host Group
The list of the host groups is displayed.
A host group uses the same interface type, and groups the hosts (HBAs), which access the
same LUN group.
The following items are displayed in the Main area:
• Name
The host group name is displayed.
By clicking this item, the [Host Group] screen is displayed. Refer to "9.1.7 Host Group Detail"
(page 280) for display items.
• Type
The interface type of the host registered in the host group is displayed.
• Status
Whether the host group is used ("Active") or not ("Inactive) for the host affinity settings is dis-
played.
"Host affinity setting" is to specify association between "host group", "port group" and "LUN
group".
- Active
The host group is used for the host affinity settings. The LUN group can be accessed from
the member host of the host group.
- Inactive
The host group is not used for the host affinity settings.
• Host Response
The host response name, which has been assigned to a host group, is displayed.
• Number of Hosts
The number of hosts, which have been registered in the host group, is displayed.
The interface types "FC" and "FCoE" are both regarded as "FC".