Fujitsu Eternus web GUI - Controller Module Detail

Chapter 10 Component Management
10.1 Component Status
ETERNUS Web GUI User’s Guide
414
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
10.1.5 Controller Module Detail
The detailed CM information is displayed.
■ Summary
The following items are displayed in the Main area:
• Location
The CM number is displayed.
• Status
The CM status is displayed. Refer to "B.5 Component Status" (page 615)
for details.
• Memory Size
The cache memory capacity of the CM is displayed.
• Part Number
The CM port number is displayed.
• Serial Number
The serial number of the CM is displayed.
• Hardware Revision
The hardware revision of the CM is displayed.
• MAC Address (USER)
The MAC address of the MNT Port is displayed.
• MAC Address (REMCS)
The MAC address of the RMT Port is displayed.
• MAC Address (FST)
The MAC address of the FST Port is displayed.
This item is displayed only when using the ETERNUS DX410 S2/DX440 S2.
• Active EC
The Edition Control (EC) number of the currently running firmware is displayed.