Fujitsu Eternus web GUI - Appendix A User Roles and Policies

ETERNUS Web GUI User’s Guide
592
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
Appendix A User Roles and Policies
This chapter describes user roles and policies.
A.1 Roles
When creating a user account, at least one role must be applied.
There are two types of roles: a default role and a custom role. The default role is already pre-
pared in the ETERNUS DX Disk storage system and the custom role can be managed by the
user.
■ Default Role
Use the default roles for normal operation. Default roles cannot be deleted. The default role set-
tings cannot be changed.
The following table shows the default roles and policies that are applied to each default role.
OK: Available
NG: Not available
*1: "Software" is the role that is used for external software. A user account with the "Software" role cannot
log in to GUI.
Policies
Default Roles
Monitor Admin
Storage
Admin
Account
Admin
Security
Admin
Main-
tainer
Software
(*1)
Status Display OK OK OK NG OK OK NG
RAID Group
Management
NG OK OK NG NG OK
NG
Volume - Create / Modify NG OK OK NG NG OK NG
Volume - Delete / Format NG OK OK NG NG OK NG
Host Interface
Management
NG OK OK NG NG OK
NG
Advanced Copy
Management
NG OK OK NG NG OK
NG
Copy Session
Management
NG OK OK NG NG OK
NG
Storage Management NG OK NG NG NG OK NG
User Management NG OK NG OK NG NG NG
Authentication / Role NG OK NG OK NG NG NG
Security Setting NGOKNGNGOKNGNG
Maintenance Information NG OK NG NG OK OK NG
Maintenance Operation NG NG NG NG NG OK NG