Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
572
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
2 Click the [Restart] button.
→ A confirmation screen appears.
3 Click the [OK] button.
→ The ETERNUS DX disk storage system shuts down after 30 seconds. After shutdown,
the ETERNUS DX disk storage system restarts.
11.2.8.2 Backup Configuration
This function backs up the configuration definition data to the Bootup and Utility Device (BUD) in
the CM. Up to four generations of configuration definition data can be stored.
The procedure to backup configuration definition file is as follows:
1 Click [Backup Configuration] in [Action].
This function cannot be used under the following conditions:
• When no configuration definition data file is selected
• When no data exists in the configuration definition data file
• When an error exists with the configuration definition data file size
• When an error exists in the configuration definition data file
To Next Page
Loading...