Chapter 2 Startup and Shutdown
2.3 Logout
ETERNUS Web GUI User’s Guide
29
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
2.3 Logout
Log out from GUI to finish the operation.
The procedure for logging out is as follows:
1 Click the [Logout] link on the top right of the screen.
→ A confirmation screen appears.
2 Click the [OK] button.
→ This completes the logging out process.
The login screen appears.
A logout is performed automatically under the following conditions:
• When a different user executes a forcible logout (*1)
• When the ETERNUS DX Disk storage system is turned off
• When no operation is performed for 60 minutes or longer after logging in
*1: When the user name is the same as a user who is already logged in, the
user who was previously logged in is forcibly logged out.
To Next Page
Loading...