Chapter 6 RAID Group Management
6.2 Functions in the Action Area for RAID Group
ETERNUS Web GUI User’s Guide
124
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
→ A confirmation screen appears.
3 Click the [OK] button.
→ Changing RAID group name starts.
4 Click the [Done] button to return to the [RAID Group] screen.
An error screen appears in the following conditions:
• When new RAID group name is not entered
• When the RAID group name does not satisfy the input conditions
• When inputting the existing RAID group name (when one RAID
group is selected)
• When the "Start of Suffix" is not specified (when multiple RAID
groups are selected)
• When the value in the "Start of Suffix" does not satisfy the input
conditions (when multiple RAID groups are selected)
To Next Page
Loading...